Downstroke Press Brake

// Downstroke Press Brake

// PRODUCT DESCRIPTION

Design and Operating Features

Downstroking bending beam
Rigidly welded, monoblock steel frame for minimum deflection under load.
Ram travel fully supported in low friction fibre slideways, which are easily adjustable.
Hydro-mechanical system assuring accurate parallelism and repeatability.
Solid torsion bar linkage for ram levelling.
Ram stroke control by precision mechanical depth-stops, built into each cylinder and electrically controlled by push-buttons with digital position display.
Independent position control of left cylinder stop for fine angle adjustment.
Pressure switch and gauge for simple control of bending tonnage and for prevention of overbending due to bottoming.
Hydraulic overload protection.
Pre-set, 2-speed bending cycle giving fast approach, slow bending and fast return.
3-function footswitch : normal bending, beam pause at any stroke point, automatic beam return upon release of footswitch.
Compact, low-maintenance, hydraulic unit located at the top rear of the machine.

// SPECIFICATIONS

-		PB1604	PB2103	PB2604	PB2606	PB3104	PB3106
Capacity	Ton	40	40	60	90	90	120
Motor Output	Kw	4	4	5.5	11	11	11
Oil Tank Volume	Lt	70	80	100	130	170	170
Speeds Approach	-	100	100	100	100	100	100
Working	mm/s	10	10	10.5	10.3	10.3	10.3
Return	-	80	80	80	80	80	85
Approx. Weight	Kg	2200	2600	4000	4600	5400	7200
Working Length	mm	1600	2100	2600	2600	3100	3100
Inside Length	mm	1350	1600	2050	2050	2550	2550
Height	mm	1860	1950	2200	2350	2350	2450
Depth	mm	1120	1120	1130	1250	1250	1250
Overall Width	mm	1490	1490	1725	1745	1870	1870
Overall Length	mm	2750	3150	3750	3750	4350	4350
Table Height	mm	800	800	860	860	870	870
Standard Stroke	Mm	140	140	170	190	190	210
Table Beam Gap	Mm	410	410	440	475	460	485
Table Width	mm	130	140	140	170	140	170
Throat Gap	Mm	260	260	260	260	260	310

-		PB3108	PB4106	PB3110	PB4108	PB3112	PB3710	PB3116
Capacity	Ton	160	160	180	200	240	240	300
Motor Output	Kw	11	11	15	15	22	22	30
Oil Tank Volume	Lt	180	260	210	260	210	260	260
Speeds Approach	-	80	100	100	100	80	80	80
Working	mm/s	9.2	9.2	10	10	10	10	8.7
Return	-	80	80	80	80	60	60	50
Approx. Weight	Kg	8000	11800	9100	12700	10250	13500	16300
Working Length	mm	3100	4100	3100	4100	3100	3700	3100
Inside Length	mm	2550	3550	2550	3550	2550	3250	2550
Height	mm	2500	2600	2600	2600	2700	2700	2850
Depth	mm	1355	1360	1550	1560	1550	1550	1780
Overall Width	mm	1870	1860	1885	2060	2085	2050	2280
Overall Length	mm	4350	5350	4350	5350	4350	4950	4350
Table Height	mm	870	880	880	880	880	880	900
Standard Stroke	Mm	230	230	250	250	280	280	300
Table Beam Gap	Mm	510	500	535	510	565	545	560
Table Width	mm	200	170	240	200	280	310	380
Throat Gap	Mm	310	310	370	310	310	310	380