Search Products
Hydraulic Section Benders
Morgan Rushworth HSR Hydraulic Section Rolling Machines
The Morgan Rushworth HSR hydraulic section bending machines are designed to roll various material sections. These models can be operated in either vertical or horizontal plain. The standard rolls supplied with the machine are hardened and have been designed to bend most sections, avoiding the cost of additional tooling. Lateral guide rolls ensure straight and true bending, or if required can be adjusted in order to spiral the material.
View Models
FEATURES & OPTIONS AVAILABLE ON ALL MODELS
For technical specifications select the model below.
- All three rolls driven for excellent traction
- Smooth rolls ensure minimum material marking
- Hardened rolls
- Moveable control panel
- Tube rolls
- Digital read out indicating top roll position
- NC control system
AVAILABLE MODELS & CAPACITIES
Click on the Model to view the Technical Specification and Download the Product Sheet.
| MODEL | HSR 50.160 | |
| Capacities | ||
| Flat Bar on Edge at 600mm Ø | mm | 60 x 10 |
| Flat Bar as Flat at 600mm Ø | mm | 100 x 15 |
| Square Bar at 600mm Ø | mm | 35 |
| Round Bar at 600mm Ø * | mm | 35 |
| Round Tube at 1200mm Ø * | mm | 70 x 2 |
| Round Pipe at 1000mm Ø * | mm | 60.3 x 2.9 |
| Rectangular Hollow Section at 1500mm Ø * | mm | 70 x 30 x 3 |
| Square Hollow Section at 1600mm Ø * | mm | 50 x 50 x 3 |
| Angle Iron Toe Out at 600mm Ø | mm | 50 x 50 x 6 |
| Angle Iron Toe In at 1200mm Ø | mm | 50 x 50 x 5 |
| Tee Section Toe Out at 600mm Ø | mm | 60 x 60 x 7 |
| Tee Section Toe In at 700mm Ø | mm | 60 x 60 x 7 |
| Tee Section Toe Up/Down at 700mm Ø | mm | 60 x 60 x 7 |
| Channel Legs Out at 800mm Ø * | mm | UPN 80 |
| Channel Legs In at 1200mm Ø * | mm | UPN 80 |
| * With optional special rolls | ||
| Technical Specification | ||
| Motor Power | kW | 1.5 |
| Top Roll Diameter | mm | 152 |
| Lower Rolls Diameter | mm | 162 |
| Shaft Diameter | mm | 50 |
| Bending Speed | m/min | 4.5 |
| Length | mm | 1000 |
| Width | mm | 750 |
| Height | mm | 1600 |
| Weight | kg | 510 |
| MODEL | HSR 60.215 | |
| Power | kw | 1.5 |
| Rolls Ø | mm | 215 |
| Shaft Ø | mm | 60 |
| Bending Speed | m/min | 4 |
| Weight | kg | 950 |
| W x L x H | mm | 1400x1000x1650 |
NOT SURE WHICH MODEL?
Contact our dedicated team of experts.